Licensing NSW Painters
Does a painter need a licence in NSW?
In brief
A painter in NSW needs a contractor licence for residential work valued at more than $5,000 in labour and materials including GST. Below that figure no licence is required. Painting is defined broadly and includes clear and textured coatings applied by brush, roller or spray gun.
The $5,000 line
Painting is one of the trade categories under the Home Building Act, and the general threshold applies. A contractor licence is needed to carry out, advertise or contract for painting work valued at more than $5,000 in labour and materials, GST included.
In practice, a single room or a front fence usually falls under the line. A whole interior or exterior nearly always falls over it. If the job is a part of a larger renovation contract worth more than $5,000, the painter needs a licence even where their own share is smaller.
What the law means by painting
The Government's definition is "applying a clear, resin-based or pigmented product in liquid form which, when put on a surface by brush, roller or spray gun, forms a dry, adherent film". It adds that painting, for licensing purposes, includes applying textured coatings by brush, roller or spray gun.
Two consequences follow. Clear finishes count, so a contractor oiling or varnishing joinery is doing painting work. And a specialist applying a textured wall coating to a rendered house is within the category too.
Licence types
- Contractor licence, for the business that contracts with you.
- Qualified supervisor certificate, for the person supervising and doing the work.
Both are available for 1, 3 or 5 years, and individual applicants must supply a National Police Check no older than four months. The penalty for unlicensed work is listed at $22,000 for an individual and $110,000 for a company.
Before the painter starts
Over $5,000, you are also entitled to a written contract and a copy of the Consumer Building Guide, and the deposit cannot exceed 10 per cent. See our NSW page for those rules.
On a house built before 1970, ask how the painter will prepare old surfaces. The federal government's lead paint guide rules out dry sanding and dry blasting of paint that may contain lead. A licence shows that a painter is qualified. It does not tell you how they intend to deal with seventy-year-old primer, so ask. Our feature on repainting weatherboards sets out what a good answer sounds like.
Search any painter on the NSW licence check.
Sources
Painters in other places: Western Australia.
Other trades in New South Wales: builders, electricians, plumbers, gasfitters, air conditioning, carpenters.
Back to trade licensing in New South Wales, or see every state and territory. Checked November 2026.