Australian houses and the trades that keep them standing

Weatherboard JournalWEATHERBOARD JOURNAL

Licensing NT Gasfitters

Gasfitter licences in the NT: the four categories

In brief

Gasfitting in the Northern Territory must be done by a person licensed under the Dangerous Goods Regulations 1985, and the licences are issued by NT WorkSafe. There are four categories: provisional gasfitter, general gasfitter for Type A appliances, gasfitter for Type B appliances, and auto gasfitter. Household work falls to a general gasfitter.

A workplace safety regulator, not a building one

In most states gasfitters are licensed by the building or plumbing regulator. The Northern Territory places them under dangerous goods law. NT WorkSafe says you must be licensed to undertake gasfitting work in accordance with the Dangerous Goods Regulations 1985, and it issues the licences.

That means the Building Practitioners Board register and the Plumbers and Drainers Licensing Board will not help you check a gasfitter. Ask to see the gasfitting licence itself, and contact NT WorkSafe if you need to confirm it.

What counts as gasfitting

NT WorkSafe's definition is broad. Gasfitting work means any work involved in installing, repairing, removing, altering or other work in connection with a fuel gas system, gas appliance, gas container, gas main, pipe, flue or other fitting. A fuel gas system is described as an assembly of equipment consisting of a gas container or a connection to a gas main, together with devices such as relief valves, pressure regulators, gas appliances and the pipes connecting them.

Two things are expressly outside the definition.

  • Connecting or disconnecting a gas cylinder that is not filled on the premises. Swapping the bottle on a barbecue is not gasfitting.
  • Work on an autogas system, which has its own licence.

Everything between the cylinder connection and the burner is within it. Running a new line to an outdoor kitchen, replacing a regulator or installing a gas hot water unit all need a licence holder.

The four categories

LicenceWhat it authorises
Provisional gasfitterWork under the supervision of a licence holder, limited to the type of gasfitting authorised
General gasfitterWork on approved Type A appliances
Gasfitter, Type B appliancesWork on approved Type B appliances
Auto gasfitterInstalling, removing, altering or repairing an autogas system fitted to a vehicle, ship or machine

The distinction between Type A and Type B decides who can work in a house. NT WorkSafe describes Type A appliances as generally off the shelf, mass-produced appliances used in domestic and commercial settings, and its examples include domestic refrigerators, water heaters and commercial catering equipment. Type B appliances are single appliances with an input greater than 10 MJ/h that form part of an integrated industrial process, such as industrial water heaters, space heaters, vat heaters, dryers and kilns.

For a household job you want a general gasfitter. A provisional gasfitter may attend, but only under a licence holder's supervision, so ask who that supervisor is.

Gas within a building job

A registered builder running a renovation must use a licensed gasfitter for the gas work, in the same way they must use a licensed electrician and plumber. The Territory's owner-builder guidance reminds owners that they take on responsibility for the insurance and registrations of the tradespeople they engage, which includes checking this licence.

For builders see builders in the NT, and for the rules on contracts and payments see our NT page.

Sources

  1. Gasfitters, NT WorkSafe
  2. Get an owner builder certificate, Northern Territory Government
  3. Plumbers and Drainers Licensing Board