Australian houses and the trades that keep them standing

Weatherboard JournalWEATHERBOARD JOURNAL

Licensing WA Gasfitters

Gas fitter licensing in WA

In brief

All gasfitting work in Western Australia must be carried out by a person holding a licence issued by Building and Energy. After any gas fitting work other than servicing, the gas fitter must give a Notice of Completion to you and to the gas supplier within 48 hours. The gas supplier may inspect the installation and you are obliged to allow access.

Building and Energy states the law in one sentence: in Western Australia, all gasfitting work must be carried out by a person who holds a licence issued by Building and Energy. Its guidance says to always use a licensed gas fitter for installations, repairs or renovations involving gas, and it spells out that this covers more than new appliances. Renovations that involve disconnecting or relocating a gas appliance count.

The regulator adds two reasons not to use an unlicensed fitter or attempt the work yourself. Unlicensed work is a risk to your safety and the public's, and it may affect future insurance claims.

The Notice of Completion

When any gas fitting work, other than servicing, is carried out, the gas fitter responsible must provide a Notice of Completion to you and to the relevant gas supplier within 48 hours of finishing.

The notice does real work in the WA system. Gas suppliers are expected to make sure they have received it before gas is connected to an installation, and they carry out inspection audits of gas fitters' work. A supplier may inspect a fixed installation, natural gas or LP gas, to check that it complies, and if a supplier requests such an inspection of your property you are obligated to permit access.

If two days pass after a job and you have no notice, ask the gas fitter for it. If it still does not appear, contact Building and Energy.

Heaters

Much of the regulator's household guidance concerns gas heaters, and it bears on what you ask a gas fitter to check. Open-flued heaters draw air from the room to feed the fire and send combustion products outside through a flue. If one is incorrectly installed, not serviced, or in a room with insufficient ventilation, it can release dangerous gases into the room. Building and Energy suggests asking the supplier or a licensed gas fitter whether your heater is open-flued, and asking the gas fitter to confirm that the room has adequate ventilation.

Renovators should take note. Sealing up an old house, adding a powerful range hood or closing off wall vents changes the air supply to an existing heater. Have the heater checked after work of that kind.

Reporting incidents

All fuel gas accidents or incidents that occur in Western Australia must be reported. Building and Energy operates a freecall number for the purpose, diverted to its Cannington office during business hours and to an answering service after hours.

Checking a licence

Use Find a licensed electrician, gas fitter or plumber. Building and Energy licenses all three trades and the one search covers them.

General contract and deposit rules for the wider job are on our WA page.

Sources

  1. Gas safety at home, Government of Western Australia
  2. Find a licensed electrician, gas fitter or plumber, Government of Western Australia