Licensing Qld Electricians
Electrician licensing in Queensland
In brief
Electricians in Queensland are licensed by the Electrical Safety Office, not the QBCC. All electrical work must be done by a licensed electrician, and that includes installing a power point, fitting a ceiling fan or replacing the plug on an extension lead. Check the electrical contractor licence number on the Office's online search before agreeing to any work.
Outside the QBCC
The QBCC licenses most building trades in Queensland, and its licensee register is where owners usually look first. Electricians are not on it. They are licensed by the Electrical Safety Office, which runs a separate electrical licence search.
The Office's instruction for choosing an electrician is to always look for their electrical contractor licence number and confirm that it is current before agreeing to any work.
What counts as electrical work
The definition comes from section 18 of the Electrical Safety Act 2002. Electrical work includes "the manufacturing, constructing, installing, testing, maintaining, repairing, altering, removing, or replacing of electrical equipment".
The Office translates that into household terms through a campaign it calls DDIY, for Don't Do It Yourself. Its list of jobs that need a licensed electrician is longer than many people expect:
- installing a light switch or power point;
- replacing a light fitting with a ceiling fan;
- repairing electrical equipment;
- constructing an extension lead;
- replacing a plug on the end of an extension lead.
The last two surprise people. In Queensland, making up or repairing a lead is electrical work.
Buying is legal, connecting is not
The Office draws a careful line. It is not illegal to purchase electrical accessories or appliances that need to be hard-wired, such as an oven, a cooktop or a fan. They must, however, be connected by a licensed electrician. The hardware shop will sell you the power point. It cannot make it lawful for you to fit it.
Safety switches
The same Office runs the state's safety switch campaign, whose message is that one safety switch may not be enough because each protects only the circuit it is fitted to. Its advice is to consider having them installed on all circuits and to test them every three months. If an electrician is already coming to your house, ask them to look at the switchboard and tell you which circuits are protected. Our feature on smoke alarms and safety switches explains how to check for yourself.
Reporting
The Office asks the public to report non-compliant electrical work and any unlicensed electrical work being done or advertised in Queensland.
Electrical work inside a building contract
Where an electrician works under a builder on a renovation, the builder's QBCC licence covers the building work and the electrician's own licence covers the wiring. For the contract and deposit rules on the whole job, see our Queensland page.
Sources
Electricians in other places: New South Wales, Victoria.
Other trades in Queensland: builders, plumbers.
Back to trade licensing in Queensland, or see every state and territory. Checked November 2026.