Australian houses and the trades that keep them standing

Weatherboard JournalWEATHERBOARD JOURNAL

Pests

Termite management for people who own timber

More than 350 termite species live in Australia and about 20 of them will eat a house. Keeping them out is mostly a matter of being able to see them coming.

A slab edge with an exposed inspection zone and termites working below ground
The exposed slab edge is an inspection zone. Bury it under a garden bed and the barrier is bridged. Drawing: Weatherboard Journal.

The first sign is often a vacuum cleaner head going through a skirting board. The paint is intact, the timber behind it has the texture of a wafer, and the owner stands there holding the hose and doing arithmetic. By then the colony responsible has usually been working the house for a long time, travelling in from a nest that may be under a tree stump in a neighbour's yard.

CSIRO's building technology guide on the subject opens with the numbers. There are more than 350 termite species in Australia, and only about 20 cause significant damage to buildings. Most of that damage is done by subterranean termites, the kind that live in the ground and need to stay in contact with it for moisture.

How they get in

That need for moisture is the weakness every protection system exploits. Subterranean termites have soft bodies that dry out in sunlight and open air, so when they cross anything they cannot eat, such as concrete, brickwork or durable timber, they build a shelter tube over it out of mud. CSIRO describes the tubes as extending from the nest and galleries over termite-resistant materials. A pencil-thick line of dried mud running up a stump or a slab edge is the insect's road, and it is also your warning.

The whole approach of modern termite management follows from that. You cannot make a timber house inedible. You can make sure the only routes into it cross a surface where a tube would be visible, and then you can look.

There is a second group to know about. Drywood termites need no contact with soil and no shelter tubes, drawing enough moisture from the wood they eat. CSIRO says they are more common in humid areas such as tropical and subtropical Queensland and New South Wales, that the main species of concern is the introduced West Indian drywood termite, and that if it is found in Queensland the state government should be notified so it can organise eradication under the Biosecurity Act 2014.

Where the risk is highest

Termites are found throughout Australia, but the destructive species are not spread evenly. The building code's own note to Part 3.4 says termites are not considered a risk in Tasmania and are a lesser risk in parts of Victoria, and suggests asking the local authority whether it holds records of activity for an area.

At the other end of the scale is the north. CSIRO singles out the giant northern termite, Mastotermes darwiniensis, found above the Tropic of Capricorn, as a particularly voracious species. The code treats it as a special case too. Naturally termite-resistant timber is accepted as not subject to attack only in areas where Mastotermes darwiniensis is not prevalent.

What the code requires of a new house

Part 3.4 of the Housing Provisions starts from a simple test: is a primary building element, meaning a part of the structure, susceptible to termite attack? Elements made entirely of certain materials are deemed not to be. The list includes naturally termite-resistant timber as set out in an appendix to AS 3660.1, with the northern exception above. If the structural frame is susceptible, a termite management system must be installed.

Three requirements in that Part are useful for an owner to know.

The system has to be recorded. A durable notice must be permanently fixed to the building in a prominent location, and the code suggests the meter box. Where a chemical is used, the notice must give its life expectancy as listed on the regulator's register label. If you own a house built in the last few decades, open the meter box. The notice tells you what was installed and, for a chemical system, when it is due to run out.

Chemicals have to be registered. Any chemical used in a termite management system must be on the pesticides register of the appropriate authority.

A perimeter chemical barrier needs a cover. Where a chemical is used as an external perimeter system, the code requires it to be covered by a concrete strip not less than 50 mm thick and 300 mm wide, measured out from the external wall. The strip stops the treated soil being dug over, washed out or buried.

CSIRO describes the two families of system. Chemical barriers use insecticide to treat the soil before and after construction. Physical barriers either block entry or force the termites to build tubes in the open; the guide mentions graded crushed rock that termites cannot penetrate, used around the slab perimeter, in external walls, around pipe penetrations and along construction joints. Neither kind is permanent in practice. CSIRO lists what degrades them: renovations, garden alterations, slab movement and the gradual depletion of the insecticide.

One point from the guide deserves emphasis because it is a common sales line. Sprays applied to susceptible timber, which should not be confused with barrier treatments, "do not guarantee the performance requirements" of the code. A quote that proposes spraying the frame and nothing else is not offering a termite management system.

How owners defeat their own barriers

Most breaches are not made by termites. They are made by people with a wheelbarrow.

The slab edge or the bottom courses of brickwork act as an inspection zone, a band of exposed hard surface that any tube must cross in view. CSIRO's advice is to keep soil and mulch levels below the concrete slab and away from the weep holes in brick veneer. A raised garden bed against the wall, a new path poured high, or a deck built hard against the house each gives termites a covered route past the barrier. The guide's own suggestion for the perimeter is a concrete strip at least 50 mm lower than the house slab and 300 mm wide, which keeps the garden back and makes inspection easy.

The rest of CSIRO's maintenance list is short.

  • Do not stack wood under or against the house. Firewood, formwork offcuts and the old fence palings behind the shed are food with a roof over it.
  • Check for water leaks from faulty plumbing or loose tiling. Damp timber and damp soil both attract attention.
  • Under a raised timber floor, keep at least 400 mm of clearance to the underside of the bearers and keep the vents open, to lower the humidity and to let an inspector crawl through.
  • Make sure renovations and extensions do not compromise the existing barrier. A new slab poured against an old one creates a joint that needs its own treatment.

The Northern Territory's guidance to owners adds the other half: inspect the building regularly yourself, and have a licensed pest controller inspect as well.

Inspections and buying a house

CSIRO says termite inspections should be conducted regularly, because of the ways barriers lose their integrity, and that when buying a home it is advisable to have one done before purchase. In Queensland, chemical termite management is licensed work at any value under the QBCC, and so is a completed residential building inspection. Elsewhere, ask your state regulator which licence a pest inspector needs.

If you do find live termites, resist the urge to rip out the timber or reach for a can of spray. CSIRO's advice is that care should be taken to avoid disturbing them further, because badly applied products can simply drive them away for a while, and a colony that has moved is harder to treat.

Questions readers ask

My house is on a concrete slab. Is it protected?

A slab can form part of a termite management system, but it is not one on its own, because termites can enter over the edge, through cracks and around pipe penetrations. Check the durable notice in the meter box, which the building code requires, to see what system was installed with the house.

How do I know when a chemical barrier has expired?

For houses built under the current code, the durable notice must state the chemical's life expectancy as listed on the regulator's register label. If there is no notice, or the date has passed, have a licensed pest manager assess the house.

Sources

  1. Managing Termites, CSIRO Building Technology Resources
  2. NCC 2022 Housing Provisions, Part 3.4 Termite risk management, Australian Building Codes Board
  3. Termite protection, Northern Territory Government
  4. Who must hold a QBCC licence, Queensland Building and Construction Commission